UAV-BASED FLIGHT SERVICES AT ITS BEST

PUBLICATIONS

DATE
TITLE & AUTHORS
EVENT & PLACE

2019-11 

UAV-BASIERTE ANTENNENMESSUNGEN
Lecture hold in the frame of the course:
INTELLIGENTE ANTENNENSYSTEME (19SE 2.04)
Hans-Jürgen Steiner;
    Aeroxess UG, 81925 Munich, Germany

CCG
Carl-Cranz-
Gesellschaft;
Wessling, Germany

2019-10 

NEARFIELD INSPECTION OF NAVIGATION SYSTEMS
WITH UAVS – FIRST RESULTS FROM THE NAVANT-NG
PROJECT
R. Geise, A. Weiss, B. Neubauer;
    University of Braunschweig, Institute for EMC
T. Fritzel, R. Strauß, H. Steiner;
    Aeroxess UG, 81925 Munich, Germany
F. Faul, T. Eibert;
    Department of Electrical and Computer Engineering,
    Technical University of Munich, Munich, Germany
J. Honda;
    Electronic Navigation Research Institute (ENRI), National
    Institute of Maritime, Port and Aviation Technology (MPAT)

EIWAC 2019;
Tokyo, Japan

2019-10 

A LOW-COST MULTICOPTER BASED NEAR-FIELD
ANTENNA MEASUREMENT SYSTEM EMPLOYING
SOFTWARE DEFINED RADIO AND 6-D LASER
METROLOGY
Raimund Mauermayer;
    Independent Researcher, Munich, Germany
Jonas Kornprobst;
    Department of Electrical and Computer Engineering,
    Technical University of Munich
Torsten Fritzel;
    Aeroxess UG, 81925 Munich, Germany

AMTA 2019;
San Diego, CA,
USA

2019-09 

NEAR-FIELD ANTENNA MEASUREMENTS WITH MANUAL
COLLECTION OF THE MEASUREMENT SAMPLES
Fabian T. Faul, Thomas F. Eibert;
    Technical University of Munich
Hans-Juergen Steiner;
    Aeroxess UG, 81925 Munich, Germany

Kleinheubacher
Tagung 2019;
Miltenberg,
Germany

2019-04 

ADVANCES IN THE DEVELOPMENT OF AN INDUSTRIAL
UAV FOR LARGE-SCALE NEAR-FIELD MEASUREMENTS

Hans-Jürgen Steiner, Torsten Fritzel, Rüdiger Strauß;
    Aeroxess UG, 81925 Munich, Germany

EUCAP 2019;
Krakow, Poland

2019-04 

INTERFERENCE MEASUREMENTS OF A HIGH POWER
CABLE-BOUND UNMANNED AERIAL VEHICLE

R. Geise, A. Weiss;
    University of Braunschweig, Institute for EMC,
    Braunschweig, Germany
T. Fritzel, R. Strauß;
    Aeroxess UG, 81925 Munich, Germany
F. Faul, T. Eibert;
    Technical University of Munich, Department of Electrical
    and Computer Engineering, Chair of High-Frequency
    Engineering, Munich, Germany

EUCAP 2019;
Krakow, Poland

2018-09 

A CONCEPT STUDY OF NEAR-FIELD MEASUREMENTS
AND CORRESPONDING FIELD TRANSFORMATIONS OF
THE MODULATED FIELDS OF AIR NAVIGATION
SYSTEMS
Fabian T. Faul, Jonas Kornprobst and Thomas F. Eibert;
    Technical University of Munich
Torsten Fritzel, Hans-Juergen Steiner and Rüdiger Strauß;
    Aeroxess UG, 81925 Munich, Germany
Alexander Weiss and Robert Geise;
    Technische Universität Braunschweig, Germany

Kleinheubacher
Tagung 2018;
Miltenberg,
Germany

2018-09 

LASER TRACKER METROLOGY FOR UAV-BASED
ANTENNA MEASUREMENTS

Torsten Fritzel, Rüdiger Strauß, Hans-Jürgen Steiner;
    Aeroxess UG, 81925 Munich, Germany

2018 IEEE CAMA;
Västerås, Sweden

2018-04 

CHALLENGES OF UAV-BASED NEAR-FIELD ANTENNA
MEASUREMENTS TO OBTAIN HIGH-PERFORMANCE
RESULTS
Torsten Fritzel, Hans-Jürgen Steiner, Rüdiger Strauß;
    Aeroxess UG, 81925 Munich, Germany

EUCAP 2018;
London, GB

2016-09 

INTRODUCTION INTO AN UAV-BASED NEAR-FIELD
SYSTEM FOR IN-SITU AND LARGE-SCALE ANTENNA
MEASUREMENTS (INVITED PAPER)

Torsten Fritzel, Rüdiger Strauß, Hans-Jürgen Steiner;
    Aeroxess UG, 81925 Munich, Germany
Christoph Eisner, Thomas Eibert;
   Chair of High-Frequency Engineering;
   Technical University Munich; 80290 Munich, Germany

2016 IEEE CAMA;
Syracuse, NY,
USA
     

⁕ NEWS ⁕ NEWS ⁕ NEWS ⁕

March 15 - 20th, 2020:

14th European Conference on Antennas and Propagation;

EuCAP 2020 in Copenhagen, Denmark

2020 EuCAP

 

November 23 - 25th, 2020:

2020 IEEE CAMA

International Conference on Antenna Measurements & Applications;

Antibes Juan-les-Pins, France

2020 IEEE CAMA

 

Aeroxess is co-organizing a Convened AMTA Session at the EuCAP 2020 about UAV-based Antenna Measurements as well a Special Session at the 2020 IEEE CAMA about UAV-based Antenna Measurements & Applications

These dedicated sessions will be an unique opportunity to discuss the new UAV-based antenna measurement technology with a very focused audience and will help you building up your network in this very new and challenging domain.

 

⁕ RECENT EVENTS ⁕

November 12th, 2019:

CCG Lecture about UAV-BASIERTE ANTENNENMESSUNGEN in the frame of the course INTELLIGENTE ANTENNENSYSTEME (19SE 2.04) from November 11-14th, 2019

CCG Course

Aeroxess will give a dedicated lecture on UAV-basierte Antennenmesstechnik, addressing its motivation, capabilities, operational constraints as well measurement standards to be considered.

 

March/April 2019:

13th European Conference on Antennas and Propagation

EuCAP 2019 in Krakow, Poland

Aeroxess co-organized in the frame of the Convened Sessions Program an EuCAP/AMTA session about UAV-Based Antenna Measurements (CS15)

2019 EuCAP

 

September 2018:

2018 IEEE CAMA

International Conference on Antenna Measurement & Applications;

Västerås, Sweden

Aeroxess co-organized in the frame of the Special Sessions Program a session about UAV-Based Antenna Measurements and Applications

2018 IEEE CAMA

 

April 2018:

12th European Conference on Antennas and Propagation (EUCAP 2018) in London, Great Britain

Aeroxess co-organized in the frame of the EUCAP Scientific Workshop Program an AMTA Scientific Workshop (SW05) on “UAV-based Antenna and Field Measurements”.

About 30 persons participated this workshop, which is a big success, considering it was the first one of this kind during an EuCAP conference.

Various questions were rised and some resulting in discusions between presenters and the audience.

It is planned to continue with this topic during the next EuCAP conferences.

Aeroxess co-organised a Workshop on UAV-based Antenna and Field Measurements, which took place during EuCAP conference in 2018

October 2016:

2016 IEEE CAMA

International Conference on Antenna Measurement & Applications;

Syracuse (NY), USA

Aeroxess presented their paper entiteled "INTRODUCTION INTO AN UAV-BASED NEAR-FIELD SYSTEM FOR IN-SITU AND LARGE-SCALE ANTENNA MEASURE- MENTS (INVITED PAPER)".

The paper was co-authored by the Chair of High-Frequency Engineering (HFT) of the Technical University of Munich (TUM).

The 2016 IEEE CAMA took place in Syracuse (NY), USA from October 23-27, 2016.

CONTACT

In case our services might be of interest for you or you have any questions please feel free to contact us.

The best way to contact us is to simply send an e-mail. Send E-Mail